Page - 1878 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1878 -
Text of the Page - 1878 -
Fig. 5 also illustrates that for extreme (unrealistic) load cases, e.g. LCX1 “No
sealing working”, the draining zones are able to control the pore water pressure in
the dam body and finally the phreativ line of seepage is controlled by the 3G rockfill
zone. Thus, the danger of unfavorable pore water pressure conditions at the
downstream slope are very unlikely to occur. The sliding stability of the
downstream slope shows a sufficient factor of safety, in spite of a cmplete
malfunction of the sealing. This proof was required to comfort all responsible
parties due to ongoing discussions concerning the cut-off wall and slab behaviour
during first impoundment.
4.2. LIMIT EQUILIBRIUM ANALYSIS
The strong characteristics of the rockfill and the sand-gravel fill material as
well as the effective seepage control design resulted in quite confident safety
factors considering the LEA for the sliding stability of both slopes (see Fig. 6).
Fig. 6
Decisive sliding circle for the extreme load case 3C, FoS = 1.42
For example, for the extreme load case 3C “Normal operation water
level/slab cracking/drain malfunction” (corrsponding to LCX1 of the seepage
analysis) a factor of safety of FoS = 1.42 is obtained whilst the required safety
factor is within the limit between 1.0 to 1.1 according to [5].
4.3. STRESS-STRAIN ANALYSIS
The stress-strain model predicted a total deformation of maximum
approximately 75 cm located close to the dam foundation at the EoC stage which
conforms to the expectations derived from benchmark projects which were
founded on deep alluvium. The results were calibrated using the measurements
results from settlement cells and settlement gauges. The obtained 0.5 % total
deformation at EoC indicates an realistic value, although it is high in consideration
1878
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik