Page - 1899 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1899 -
Text of the Page - 1899 -
core of the upstream cofferdam. The impervious blanket is established with
clay/weathered shale and compacted layer by layer. The thickness of each layer
is limited to 0.3 m as maximum, and the total thickness is not less than 2 m. In the
area in front of the dam face, the thickness is increased to 4.0 m or more. The
impervious blanket was completed prior to the initial reservoir impounding.
6. SEEPAGE THROUGH FOUNDATION AND FROM RESERVOIR
After completion of the RCC dam construction, the sub-contractor started the
initial reservoir impounding on 29th March, 2011. Reservoir filling ran smoothly
until 19/20th April, 2011 and the successive days. However, when reaching the
reservoir water level El. 689.50 m, a large amount of seepage water flowed out of
the existing drainage holes at right abutment into the drainage gallery at
El. 634.0 m. The discharge of seepage water exceeded the installed capacity of
the 3 pumps of 133.2 l/s, so that the galleries were flooded. The water level in the
galleries/vertical shaft reached to their maximum at El. 643.88 m, i.e. 9.88 m above
the invert level of the grouting gallery.
Fig. 4: New springs upstream of the Bailey bridge
Some 200 m to 300 m upstream of the Bailey bridge several new springs
occurred on the left bank shortly after initial reservoir impounding, others
experienced a sudden and drastic increase in discharge (Fig. 4). Four of these
springs were perennial with little discharge all over the year [5]. Seepage water is
percolating through open joints and fissures of the limestone. The total run-off of
these springs in June/July 2011 was estimated to range between 0.05 m3/s and
1899
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik