Page - 1910 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1910 -
Text of the Page - 1910 -
ï‚§ Highest mass per unit area giving an important resistance to lifting in windy
regions. We can leave the BGM exposed (large economy) and we can install
even under bad weather and very windy conditions.
ï‚§ High puncture resistance. Tire-mounted vehicles and equipment even full
loaded can run directly on top of the geomembrane traverse on top of the
geomembrane during installation and maintenance. See Fig. 3.
Fig. 3. Tire mounted equipment traffic on top of the BGM
ï‚§ BGM does not form wrinkles even in case of daily temperature variations.
So, installation can take place at any time of the day, without interruption.
Also, cover material can be placed on top of the geomembrane at any time
of the day.
ï‚§ The sand surfacing imparts a frictional surface to the geomembrane that
reinforces the UV resistance of the bitumen. This face has a friction angle
around 34° (values coming from tests ‘’Geosynthetic Friction by the Direct
Shear Method ASTM D5321-02’’ done by Sageos (Qc, Canada) and INSA
(Lyon, Fr) and Precision lab (Anaheim, California, USA) daughter company
of the US TRI lab and higher, depending of the material placed above it.
Based on the above, designers can use slopes steeper than 2H: 1V at the
upstream face of a dam or the banks of reservoir.
ï‚§ BGM can store potable water. Proved by US international certificate NSF 61.
ï‚§ BGM has a very high resistance to earthquake as demonstrated in the field
(Milpo dam having supported an earthquake of a magnitude of 8.1 on the
Richter scale and by tests done by TRI. in California for Los Angeles
Department Water and Power Interface Friction Testing.
ï‚§ The density is larger than 1 ton/m3, so BGM can be installed under water.
The seams under water can be done with a special mastic.
ï‚§ The manufacturer supplies monitors for training local teams of installers on
site.
ï‚§ The quality of the total length of the seams can be controlled by manual or
automatic ultra-sounds apparatus control. Which is recommended for control
of the dam watertightness. See Fig. 4.
1910
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik