Page - 1915 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1915 -
Text of the Page - 1915 -
3.3. In Europe, in Finland and in Russia
3.3.1 Kiitilä Gold Mine (Finland) – Fig. 10
Construction is well underway on the Kiitilä mine in northern Finland,
approximately 900 kilometres north of Helsinki and 40 kilometres from Kiitilä. The
Kiitilä mine will feed 3,000 tons per day surface processing plant.
The Kiitilä Mine site lies within the Arctic Climatic Region (150 km north).
Temperatures are cool with an average mean monthly temperature in July of 15°C
and in January of -15°C. The mean annual air temperature at the site is
approximately 0 °C. Snow falls in every winter month, although rain generally only
occurs between May and October.
Fig. 10. Kiitilä site: general view
Dam walls are made from blasted rock with compound structure. This means
that the main dam wall is made from maximum 600 mm diameter grain size blasted
rock. The “wet” sides of the dam walls are made also from blasted rock (dam max.
300 mm grain size) and gravel (grain size 55 mm).
These layers are also compacted with an excavator equipped with a
compacting plate.
BGM was chosen because:
ď‚§ It can be installed directly over the prepared mineral sealing bottom layer
instead of a layer of sand, and then geotextile and finally a polymeric liner.
This provided a large cost saving because you don’t have to transport
materials from outside the site and in the same time, you save many tons of
CO2.
ď‚§ The low thermal expansion coefficient allows keeping the liner flattened
directly on the mineral sealing layer like this, the combination of both moraine
and BGM liner is always flat and in permanent contact of the glacial till
support so, due to this intimate contact, the watertightness is assumed at 2
levels:
- At the level of the geomembrane with a permeability of around 10-14 m/sec,
that could be considered as an active barrier,
1915
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik