Page - 1947 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1947 -
Text of the Page - 1947 -
Fig. 3
Piping far away from the dyke and
stabilizing measures to reduce the
hydraulic gradient (photo: L. Nagy).
Renard éloignée de la digue et mesures
de stabilisation pour réduire le gradient
hydraulique (photo: L. Nagy). Fig. 4.
Boiling “volcanos” after the flood.
Retrogressive internal erosion towards
the dyke (photo: L. Nagy).
Bouillant "Volcans" après l'inondation.
Erosion interne rétrograde vers la
barrage (photo: L. Nagy).
3. FLOOD CONTROL MAESURES AGAINST HYDRAULIC FAILURE
Hydraulic failure as an effect of underseepage may be prevented mainly by
two permanent measures landside of a dyke or flood protection dam by:
• Filling of berms, thus displacing the possible starting point of internal
erosion or piping farther away from the structure, and decreasing the hydraulic
gradient at this point. Such berms should be designed and constructed such that
they work simultaneously as access ways/roads for quick and easy dam defence
in the case of severe floods.
• Installing pressure relief drainage systems in form of trenches, relief
stone columns or relief wells.
A filter stable berm compensates through its counterweight the hydrostatic
pressure beneath the blanket (Fig. 5a) and prevents hydraulic failure by seepage
or uplift, or by internal erosion and piping. When seepage through or beneath the
dyke occurs, a free water outflow must be allowed; clogging would be counter-
productive. Otherwise an excessive pore-water pressure could cause a failure.
In many cases, berms merely move the hydraulic problem farther away
from the dyke, and retrogressive internal erosion may finally reach it in the long
term (after several floods). Boiling and internal erosion have been observed up to
20 to 50 m away from dykes and dams (Fig. 3), even though they were only 3 to
6 m high. Moreover, wide berms are often not possible under confined space
conditions; therefore relief drainages are preferred under these circumstances.
Pressure relief systems are high permeable linear or punctual drainage
elements at the landside embankment toe (Fig. 5b). They connect the terrain
surface with the aquifer and allow a controlled pressure relief during floods, while
water freely discharges. To prevent the relief elements from clogging due to fine
particles transport from subgrade, they must be wrapped into a geotextile.
1947
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik