Page - 1950 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1950 -
Text of the Page - 1950 -
thickness of about 10 cm follows a homogenous aquifer layer of coarse sand with
a thickness of about 18 cm. In addition, the dam has an imperfect cut-off wall (i.e.
with underseepage), which slightly embeds into the aquifer.
The pressure beneath the blanket due to underseepage was measured by
means of piezometers pipes in the longitudinal and transversal model axis. In
addition to these measurements, also the discharge was quantified.
Fig. 7
1:10 small-scale dam model on two-layer strata.
1:10 modèle de barrage à petite échelle sur les strates à deux couches.
Fig. 8 shows the pressure distribution lines beneath the blanket for test series
with single relief element depending on its permeability and embedment length
into the aquifer. Both – the relief gravel column as well as the relief well – lead to
a significant reduction of the hydrostatic pressure. If no relief measures would be
installed, due to the blocked outflow boundary the hydrostatic conditions on the
landside would became equal to the hydrostatic head on the waterside. It can be
also seen that the element permeability significantly influences the pressure
reduction. A similar behaviour can also be observed in terms of embedment
length. However, the effect of embedment depth on the pressure relief, as
supplementary investigations with the calibrated numerical model show, is also
strongly influenced by hydraulic parameters of the aquifer.
Fig. 8
Pressure along the longitudinal axis of the 1:10 model with a single relief column.
Pression le long de l'axe longitudinal du modèle 1:10 avec une colonne en relief.
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Distance [m]
S40 EIN0%KIES S40EIN0%o.KIES
S40 EIN30%KIES S40EIN30%o.KIES
S40 EIN50%KIES S40EIN50%o.KIES
0,00 0,25 0,50 0,75 1,00 1,25 1,50 1,75 2,00 2,25 2,35
0,0
0,1
0,2
0,3
0,4
0,5
1950
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik