Page - 1952 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1952 -
Text of the Page - 1952 -
In numerous series of measurements, a clear relief behavior of drainage
columns could be confirmed despite certain anomalies. An example of the
pressure relief behaviour due to a single relief column (Ø 600 mm) shows Fig. 10.
The pressure reduction at the beginning of the measuring profile was partly
caused by possible local clogging of the aquifer in combination with the relieving
effect by the relief column. This resulted in a reduction of 50% in the hinterland.
The maximum discharge for the highest water level was about 0.95 l/s per relief
column with 4 m spacing.
4.5. NUMERICAL MODELLING
In order to examine the general application of numerical results, a model
calibration with the GGU Software was carried out based on the model tests. For
this purpose, the small-scale model test results were used, because the 1:10
model had a higher degree of homogeneity as the 1:1 dam model. The
calibration was first carried out for a fully penetrating relief trench by variation of
the aquifer permeability and subsequently extended to a three-dimensional
model with a single relief column. Based on the model calibration, numerous
comparative simulations were performed for both models. They verified the
application of the calibrated three-dimensional numerical model for further studies
of different geometric and hydraulic parameters (diameter, permeability,
embedment length, spacing of a multiple column system) beyond the limits of the
physical modelling.
The results from the numerical calibration of the three-dimensional model
with a fully penetrating single relief column (with/without gravel) are shown in
Fig. 11. The diagrams show the comparison of the measured pressure potential
lines and the discharge from the relief column with the results of the numerical
calculation.
Fig.11
Results of numerical calibration for a model with a single relief column: pressure
lines (left) and discharge from the relief column (right)
Résultats de l'étalonnage numérique pour un modèle avec une seule colonne en
relief: lignes de pression (à gauche) et décharge de la colonne decompression (Ã
droite)
Distance [m]
Relief column without gravel Ø50mm/fully penetrated - calulated
Relief column without gravel Ø50mm/fully penetrated - measured
Relief column with gravel Ø50mm/fully penetrated - calulated
Relief column with gravelØ50mm/fully penetrated - measured
0,00 0,25 0,50 0,75 1,00 1,25 1,50 1,75 2,00
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2,25 2,35 0,275
0,300
0,325
0,350
0,375
0,400
0,425
0,450
0,475
0,500
0,525
0,0 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0 11,0 12,0
Discharge per relief element [ml/s]
Relief column with gravelØ50mm/fully penetrated - measured
Relief column with gravel Ø50mm/fully penetrated - calulated
Relief column without gravel Ø50mm/fully penetrated - measured
Relief column without gravel Ø50mm/fully penetrated - calulated
1952
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik