Page - 1953 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1953 -
Text of the Page - 1953 -
REFERENCES
[1] BRANDL H. (2012). Failures and defense of flood protection dykes and
levees. Sicherung von Dämmen, Deichen und Stauanlagen – Handbuch für
Theorie und Praxis, Vol. IV (R. A. Herrmann, J. Jensen), Universität Siegen,
2012, pp. 3-20,.
[2] BRANDL H., SZABO M. Hydraulic failure of flood protection dykes.
Proceedings of the 18th Int. Conf. on Soil Mech. and Geot. Eng., Paris, 2013.
[3] CEN (2004). EN 1997-1. Eurocode 7: Geotechnical Design – Part 1: General
Rules. Comiteé Europeén de Normalisation, Brussels.
[4] GIROUD, J. P. Development of criteria for geotextiles and granular filters.
Prestigious Lecture 1. Proceedings of the 9th Int. Conf. on Geosynthetics,
Guaruja´, Brazil, 2010, pp. 45 – 66.
[5] NAGY L. Buzgárok az árvizvédelemben. (ISBN 978-963-12-0319-6) und
persönliche Mitteilungen (TU Budapest), 2014.
[6] SZABO M. Experimental and numerical analyses of relief drainages by
underseepage of dykes and levees, Doctoral thesis, Vienna University of
Technology, 2017.
SUMMARY
Underspeepage of dams, dykes or levees may lead – especially in the
long-term – to erosion of the ground due to (subsequent) floods. The pressures
that develop landside of the dyke during floods may cause heaving or
uncontrolled rupture of the near-surface blanket resulting in a concentration of
seepage flow, often accompanied by piping, and potential dyke failure. Such a
hydraulic failure develops mostly rather inconspicuously; therefore it is often
underestimated in practice. Erosion criteria can be used to describe the critical
state for different soil types found during ground investigation. For the control of
underseepage pressures in the aquifer and for hydraulic failure prevention
stabilizing measures at the embankment toe zone are essential. Filter stable
berms, relief drainage columns or trenches, sometimes also relief wells have
proven very successful.
If pressure relief measures are required, the selection of a suitable relief
system has to consider the geotechnical, hydraulic and local conditions. For the
design of the selected relief system (drainage columns, trenches, wells)
numerical methods are commonly used in practice. A technically and
economically optimized design is only possible, if hydraulic boundaries of the flow
field (e.g. long-term data from groundwater observation) and the permeability of
the aquifer can be determined as precisely as possible, as could be experienced
in experimental and numerical studies. Finally, monitoring of existing projects
contributes significantly to continuous calibration and sophistication of numerical
modelling and practical design.
1953
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik