Page - 1959 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1959 -
Text of the Page - 1959 -
Fig. 4
Demonstration of three bends in grouting plane (GP) along arc galleries
G1, G2 and G3 at Glevard dam site
2. CONCEPT OF DRILLING INCLINED CROSS BOREHOLES FOR THE
WATER TIGHTENING
Drilling inclined cross boreholes for the water tightening at the left abutment
rock mass in Glevard dam is necessary. However, there are some challenges and
uncertainties raised on the rate of success of the inclined curtain compared to the
vertical curtain. However, in this project increase the construction costs of the
inclined cross boreholes can be justified due to technical and construction reasons,
as follows:
1. Based on the Fig. 5, it can be seen that the vertical / inclined combined
borehole system produces rhombuses shapes with longer diameters twice as long
as the longer diameter of cross boreholes. Therefore, this area is twice as large as
the similar rhombus shape obtained from the inclined cross boreholes. It makes
the areas among the boreholes twice and with regard to the situation of
discontinuities, the limestone rock masses of the area have more uncertainty
compared to the cross boreholes. It results in less effective grounding practice.
2. Selection of the inclined cross boreholes system, in terms of the costs and
other economical basics, does not increase an additional cost to the project.
3. In this project, inclined boreholes drilled for exploration grouting which
shows the grout curtain as almost 15° from vertical, have very good results in terms
of crossing the joint and cracks system (discontinuities) and grouting in them will
1959
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik