Page - 1971 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1971 -
Text of the Page - 1971 -
In the above relations, wi is the weight which is the ratio between the spacing of
each joint set and all joint sets. αi is the dip gradient of the joint set i and βi is the
gradient between δ and direction of the joint.
To estimate optimum θ and δ, their values estimated in the mentioned
relationships from 0° to 180° for θ and from 0° to 360° for δ.
In the x and y diagram, where x is θ or δ and y is LSBIθ or LSBIδ, the least
values of these two diagrams provide values of θ and δ.
As shown in figure 15, the value of θ has been selected as equal to 130° in
relation to the horizontal surface (0° is another answer which is not used (horizontal
borehole)).
Fig. 14
Demonstration of grouting plane (GP) along galleries LG1, LG2, Glevard dam
site
VP: d = 7°, θ = 70°, H = 45 m, l = 47 m, m = 12.06 m
VPd: β = 47°, d’ = 140°, θ’ = 70°, l’ = 47.9 m, m’ = 16.4
HP = Horizontal Plane
VP = Vertical Plane Crossing d’
VPd = Vertical Plane Crossing d
G1, G2 = Galleries
GP = Grouting Plane
λ = Angle Between l’ & axis of G1, G2, on the Gp
Value of δ estimated in figure 16 and the borehole azimuth selected as 125°.
According to the mentioned researchers, if the value of θ is more than 90°, δ with
a value of less than 180° will be more appropriate. Based on the two values of θ
and δ, the spatial layout of the borehole will be 125/160 and as the dip gradient is
against the horizon, the spatial layout obtained as 125/30.
1971
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik