Page - 1980 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1980 -
Text of the Page - 1980 -
CONCLUSION
1. With regard to the results obtained in the surface and underground
investigations in the boreholes, the large number of vertical joints and fissures
found with two dominant directions. Indeed, it is necessary to drill cross boreholes
to have more appropriate and more numerous contacts with discontinuities and
more appropriate grout to attain more success in water tightening.
2. For a better understanding, the conditions of boreholes presented in
geometrical view, in both vertical curtains with vertical- inclined and inclined -
inclined cross-borehole systems, as shown in Fig. 1. In the inclined cross-borehole
system, there is a number of crosses and smaller areas found among the
boreholes, which is itself a reason for the necessity of carrying out inclined cross
boreholes to obtain more success compared to the vertical — inclined cross
boreholes.
3. Regarding the effectiveness of the grouting radius, it again pointed out that
the rhombic forms among the inclined cross boreholes have areas equal to one-
half of the rhombus forms obtained in vertical-inclined boreholes. Penetration of
the vertical-inclined grout obtained with smaller penetration radius but in the
inclined-inclined cross borehole system, resulting a better overview of the grouting
layout and attain more success. In addition, the construction has no additional cost
for the inclined-inclined cross boreholes as well as increasing the grout radius and
thickness of the curtain. Based on the results, drilling the inclined curtain plane,
which will provide the best result in order to cover more joints.
4. It can be concluded from the above-mentioned descriptions that the grout
curtain should drill with the inclined cross boreholes and spatial layout of 97/75,
114/75 and 130/75. These inclined borehole located in the three directions of the
access tunnel to the dam crest and middle and lower grout galleries of the
limestone rock mass is carried out with a better groutability. With an increase in
the grout radius, the thickness of the water-tightening curtain increased and the
hydraulic gradient (for a more appropriate longer performance) decreased, which
is totally justifiable and necessary for construction purpose.
REFERENCES
[1] Zhou, W. and Maerz, N. H., Identification the optimum drilling for
characterization of discontinuous rock the Geological Society of
America.(2003)
[2] Nabavi, M. H., 2009, Research on defects of RQD estimate and solution in
equivalent joint effect on the rock masses – Mining Engineering System
Magazine, No. 2, spring 2009, pp 14 – 34.
[3] Ewert, F.-K.: Rock grouting with emphasis on dam sites, 225 Figures, 428
p. Springer, Berlin(1985)
1980
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik