Page - 1991 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1991 -
Text of the Page - 1991 -
About grouting materials, Chinese standard “Technical specification for
cement grouting construction of hydraulic structures” (DL/T 5148-2012) give the
requirements of cement sieve: “The sieve residue is not more than 5% through 80
μm hole sieves”. and the demand of specific surface area: “The specific surface
area of Portland cement is not less than 300kg/m2”. But the quality requirements
of slurry raw materials remain generally high in the foreign projects where the
specific surface area of cement must not be less than 350 kg/m2.and the sieve
residue of American standard sieve is 0 through No.200 mesh (0.075mm)[7].
With regards to grouting pressure, DL/T 5148-2012 tends to make use of
high pressure. The definition of “high-pressure cement grouting” can be found –
cement grouting whose pressure exceeds 3 MPa. During the domestic grouting
construction, the tendency of high-pressure grouting (≥3MPa) is more and more
obvious, it seems if the pressure must keep high enough to ensure the quality of
grouting. However, in international projects, it is not thought to be better to use
higher grouting pressure. Merowe Project and the Upper Atbara Project technically
require that the maximum grouting pressure does not exceed 1.6 MPa (maximum
hole depth exceeds 50m)[8].
4. CONCLUSION
The differences on foundation treatment technical standards of hydropower
engineering between Chinese and American standards have been discussed. The
results can be applied in the international hydropower project as a reference for
engineers and technicians. Engineering standards are the critical guidelines for the
construction of a project. Therefore, the standards need to be used in a specific
project item should be clearly studied. The overall and some detailed differences
on Chinese and American standards have been compared in this paper, and the
differences between China and other countries such as Britain, Germany, France,
Australia and so on, whose standards are often applied in international project,
remain to be investigated more deeply.
REFERENCES
[1] TASSCY G. Standardization in technology-based markets. Research Policy,
2000.
[2] ZHANG X.T., YU W.Y., TANG W.Z., et al. Research on the application of
international Hydroelectric Engineering related technical standards. Project
Management Technology, 2016.(in Chinese)
[3] Design specification for concrete arch dams. Ministry of Water Resources of
the People's Republic of China, 2003. (in Chinese)
[4] Design specification for concrete arch dams. People's Republic of China
national development and Reform Commission, 2006. (in Chinese)
1991
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik