Page - 1995 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1995 -
Text of the Page - 1995 -
The dam was constructed in 11 blocks each with a vertical water bar detail
labelled Blocks C to V. The dam was constructed in on average 1.2 m high
concrete pours. Over the life span of around 60 years the mass concrete of the
gravity dam has begun to leak at some of the horizontal construction joints. The
main leaks were within the inspection gallery in blocks S, T, U & V (near the
orographic right bank of river Erne) and on the downstream face of these blocks.
These were on the north of the spillway gates. To the south of the spillway gates
the main leaks were on the downstream face of blocks N, O & P. The inspection
gallery and the downstream surface near the orographic left bank of river Erne
were in good order.
2. DESIGN APPROACH
2.1. HISTORY AND FEASIBILITY STUDY
There had been leakage in the dam for many years since construction.
Station Drawings from 1969 detail each leak on the face of the dam. Unsuccessful
attempts to seal the leaks had been made in the past. In 1987 grouting was carried
out by station staff in Block U from within the inspection gallery. In 2008 divers had
tried to seal the upstream face of the joints using an underwater sealing material.
None of these attempts had any long-term benefit.
As part of the management of Dam Safety within ESB, an External Dam
Safety Committee (EDSC) advise ESB on Dam Safety at each of their installations
in Ireland on an annual basis. In their 10 Year Inspection Report of 2010, the EDSC
had recommended action to be urgently taken to reduce these seepages in
Cathaleen’s Fall Dam. ESB considered different sealing options for the dam
however the EDSC preferred option was to seal the upstream face of the dam
using geomembrane. ESB investigated this option but ruled it out due to the
Figure 1: Aerial View of the Cathaleen's Fall Dam
North South
Spillway gates
1995
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik