Page - 1996 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1996 -
Text of the Page - 1996 -
number of the leaking construction joints being buried in rockfill. To carry out this
method would have required underwater excavation works in rock on the upstream
side of the dam to expose the joints and create space for sealing works. This would
have been a hugely expensive project to undertake. Figure 2 shows the leaking
sections of the concrete gravity dam including the section where some of the
leaking construction joints were buried.
Figure 2: Upstream View of Affected Blocks - Prior to Reservoir Filling
Block O would have been considered the most difficult of blocks to seal due
to its history. During construction of Cathaleenâs Fall Dam, diversion channels with
gates were constructed at Blocks M and O to facilitate completion of the closing
Block N. After construction, the gate at Block M was retained as a scour gate and
the channel at Block O was blocked up at the upstream end by means of a concrete
wall. Over the years the cavities in Block O were filled with concrete on a phased
basis. In 1995 the channel cavity was filled and in 1999 the redundant gate shaft
was filled with concrete. The integrity of the cavity filling works was questionable
and seepages from this block were evident for many years.
ESB consulted with an EDSC recommended Civil Engineer with Dam
Sealing experience, Mr. Elmar Netzer from Vorarlberger Illwerke in Austria, who
recommended further investigations including drilling boreholes in each block and
carrying out water pressure tests. Mr. Netzer recommended drilling and grouting
from the inspection gallery and the crest of the dam. ESB accepted this as the only
technically feasible option for sealing the leaks.
Following these investigations, with the assistance of Mr. Netzer, ESB
International prepared a detailed specification and tender documents for the
proposed sealing works.
âBlocks M, N & O â
âBlocks P, Q & R â
âBlocks S, T, U & V â
Rockfilled trench over leaking
construction joints.
1996
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen UniversitÀt Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik