Page - 2000 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2000 -
Text of the Page - 2000 -
4. GROUTING WORKS
Low pressure grouting was used to seal the slightly to highly water-
permeable joints. Ordinary Portland Cement (OPC) and microfine cement was
generally used to seal thin and slightly water-permeable joints, synthetic resin was
used to seal highly water-permeable joints, as the synthetic resin has a high
resistance to washout and a short setting time.
The first step of each grouting was the core extraction and judgement of the
condition of the in-situ concrete, cracks, joints, voids and porosity. Based on these
results, the single packer was brought into the right position within a centimeter to
reach all leakages. Furthermore, it was reacted constantly to the actual grouting
volumes to define whether tertiary drillings are necessary (split-spacing-method).
The basic grouting sequence was from coarse to fine. Generally, it was
started with Ordinary Portland Cement (OPC) such as Dyckerhoff VARIODUR 50
and later grouted with finer materials such as Dyckerhof MIKRODUR R-F/E plus
and MIKRODUR R-U/E plus. In exceptional cases (highly water-permeable joints
and high flow velocities) synthetic resin such as Sika RODUR 505 / 510 was used.
The stop criteria had to be derived from the Grouting Intensity Number (GIN)
and is described as follows:
ď‚· Cementitious Grouts: 40 ltr . bar / 1.20 m grouting length with a
maximum grout volume of 50 liters / stage
ď‚· Synthetic Resin: 30 ltr . bar / 1.20 m grouting length with a maximum
grout volume of 40 liters / stage
Figure 6: Photo of Downstream Face of Block U showing seepage (left) and
results of sealing works (right)
In Figure 7 and Figure 8 the grout volumes per unit grout length are shown
for the primary and secondary grout holes. It is clearly visible that the grout volumes
have decreased from the primary to the secondary grout holes. The highest grout
volumes were recorded in Block O, as there were possibly still remaining cavities
in the section of the filled diversion channel.
2000
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik