Page - 2064 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2064 -
Text of the Page - 2064 -
4. CONCLUSIONS
In the original design of Ayanunga’s forebay, flow velocity near inlet was
almost 2 m/s, exceeding submergence safe conditions (1m/s as recommended by
good practice). Furthermore, two big vortices were localized near the penstock inlet
with noticeable recirculation motion. This was due to high flow speed of water,
which enters forebay from adduction channels, and also due to its uncommon
shape. Consequently, thanks to the first analysis, original design was modified, by
introducing internal walls in the forebay. As result, the vortices are localized
upstream of the walls and far from penstock inlet. The second analysis observed
that wave propagation modeling reduces spillway efficiency. Results helps on
proper re-location and optimal design of spillway to improve its discharge capacity.
In conclusion, a deep knowledge of hydraulics allows savings and
efficiencies (forebay optimization): the use of 2D (IBER) and 3D (Ansys)
simulations allows to solve complex problems like vortices formation and transients
with tools that, until recently, for their cost, were reserved to much larger projects.
REFERENCES
[1] VEN TE CHOW . Open Channel Hydraulics. 1959.
[2] HENDERSON, F. M. Open Channel flow. New York, USA. 1996.
[3] INSTITUTO FLUMEN, UNIVERSIDAD POLITECNICA DE CATALUNYA &
CIMNE. IBER ® v.2.4.3. 2017.
[4] ANSYS INC. Ansys 16.1 ®. 2015.
[5] ASCE, AMERICAN SOCIETY OF CIVIL ENGINEER. Guidelines for Design
of Intakes for Hydroelectric Plants. 1995.
[6] LEVIN, L. Formulaire des conduits forcées, oléoducs et conduits d´aération,
Dunod. 1968.
SUMMARY
This study takes advantage of the power of 2D (IBER) and 3D (ANSYS)
calculation codes to analyze and study the flow in a forebay of a hydroelectric plant
currently under construction by enel green power, in peru. In the first part, the re-
circulation zones in the forebay are modeled and analyzed; in a second part, are
studied and modeled the propagation of the wave in the case of load rejection,
along the adduction channels, optimizing the position and the threshold height of
the emergency spillway. Finally, is provided a very simple and effective solution to
the formation of turbulences and recirculation zones, in order to avoid affecting the
submergence in the forebay at the penstock inlet. The application of 2 simple ad-
2064
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik