Page - 2070 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2070 -
Text of the Page - 2070 -
Table 1 compiles geotechnical characteristics for the rock.
Table 1
Rock mass parameters
Paramètres du massif rocheux
Lithologic
Unit Bulk
Density σc φ c E Kf
[g/cm³] [kg/cm²] [°] [kg/cm²] [kg/cm²] [m/s]
Breccia 1.7 30 40 10 7500 2E-6,
grouted 5E-7
Tuff 1.6 20-
30 1-5 1000 -
1500 anisotropic
1E-4 - 1E-7
The strength of the TfX detected after the incident reached only half of the
values previously found for tuff layers.
Boreholes in the low-cover stretch found groundwater levels 46 to 48.6m
above the tunnel. The design of the lining adopted 30m external head. Jacking
pressures estimated from water pressure tests near the failure ranged 4 to 5 bar
above the groundwater level.
4. DESIGN AND CONSTRUCTION OF THE TUNNEL
Evaluating several alternatives, the designers, in concurrence with an
international Board of Consultants, adopted the following criteria.
The tunnel should be placed as high as the hydraulic conditions permit to keep
the internal pressure low but still maintaining a rock cover of more than 0.7
times the hydraulic static head [2, 15]. Even with these precautions, the design
provided a continuous concrete liner, reinforced, with contact and consolidation
grouting. As verified by the Frey-Baer method [5], supported by FEM analysis,
the width of cracks in the liner would stay below 0.25 mm and the leakage be
limited to 20 l/s.
The Tf4 tuff layer should be avoided, because it was suspected to contain low-
modulus horizons, undesirable for the construction and stability of the tunnel.
The tunnel should run in the tuff breccia, aiming to keep a distance of about
15m from the Tf4 tuff horizon. According to a FEM simulation, the convergence
observed in the tunnel would alert on the critical presence of a weak layer in its
vicinity.
Excavation and preliminary support followed the concepts of NATM, with
geological logging, rock mass classification and convergence monitoring.
2070
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik