Page - 2083 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2083 -
Text of the Page - 2083 -
In this research, the noncommercial discrete fracture network code, 3DFAHAM*,
will be used to generate 3D representations of the rock mass at Rudbar-Lorestan
pumped storage power plant and predict the HC tensor of a representative
element. To this end, the geometrical and mechanical characteristics of 1035
recorded discontinuities at Rudbar-Lorestan powerhouse cavern will serve as
input data. The predicted hydraulic conductivity will be compared to the hydraulic
conductivities that are obtained by back analysis of the recorded volumetric flow
rate. Analytic methods will be used for the back analysis. When the volumetric
flow rate in an underground opening is available, the equivalent hydraulic
conductivity of the rock mass can be calculated inverting one of the several
analytical or empirical equations to calculate discharges into tunnels [5, 6, 7, 8].
2. CASE STUDY
2.1. LOCATION
Rudbar Lorestan Pumped Storage Power Plant with the hydropower generation
capacity of 1000 MW is under construction100 km south of the city of Aligoodarz
in Lorestan Province of Iran. The main objective of this project is to generate the
peak electricity required for the national grid through the storage of the surplus
water in a separate reservoir. The powerhouse cavern of the pumped storage
plant is located at the right bank of the main dam (earth dam). The distance
between the reservoir and the powerhouse cavern is approximately 350 m. The
normal water level is 1756 m.a.s.l and the elevation at the powerhouse crown
1700 m.a.s.l. The height, width and length of the powerhouse cavern are 49.5,
26.3 and 129.75 meter respectively. It will be excavated at 400m depth.
2.2. GEOLOGY AND TECTONIC
In accordance with the structural - sedimentary classification of Nabavi (1976),
Rudbar Lorestan Pumped Storage Power Plant is located in the structural-
sedimentary zone of High Zagros. As per the defined structural characteristics,
this zone consists of numerous thrust faults, rough topography and lots of
anticlines and synclines. In regional scale, the bedrock of this zone includes the
rocks of the Paleozoic to tertiary geological eras. In accordance with the field and
laboratory investigations (on local scale basis), the powerhouse cavern area has
been constituted by Dalan Formation. The outcrops of Dalan formation with a
thickness of about 350 m to 400 m consist of the moderate to thick bedded
*3 Dimension of Fracture Characterization and Hydraulic Analysis using Mapping
Methods
2083
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik