Page - 2088 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2088 -
Text of the Page - 2088 -
Table 1
Estimated rock mass permeability
Permeability
(Lu)
Rock mass
permeability(m/s)
Water head above
tunnel center (m)
Q(m3/s/m)
Tunnel
radius(m)
9
1.15e-6
100
0.0001753
3
26
3.31e-6
22
0.0001753
3
3.5. FIELD MAPPING
The main input data that are needed to generate a DFN representation of
the rock mass and calculate the HC tensor are the geometrical and mechanical)
characteristics of the discontinuities. Scanline sampling and areal sampling
including circular, rectangular and square windows have been resorted to obtain
the geometrical and mechanical characteristics of the discontinuities around the
powerhouse cavern. Eleven scanline lengths ranging between 10 m and 16 m
have been used to survey the discontinuities. Eleven circular windows sampling
with radius of 55 cm to 1.5 m and 15 rectangular window sampling with
dimensions of maximum 2.2 m*1.9 m have been used as well, Fig 6. The
discontinuities were sufficiently mapped in the underground spaces and include
1035 joints, 639 fractures with Scanline and 396 fractures with areal sampling,
which are considered well above the required minimum limit that is fixed to 100
for each joint set [10]. The most important parameters to estimate the equivalent
permeability of the rock mass and seepage values are the mechanical and
hydraulic aperture of discontinuities. With regards to the importance of the
mechanical aperture, this characteristic has been measured. Discontinuities
aperture have been measured during the detail design period (phase II) and
construction period (Phase III). The mechanical aperture values extend on a wide
range and have been separated in three classes including low, average and high
values (for phase II).
Fig. 6 Scanline and areal samplings in exploratory tunnel in the crown of the
powerhouse cavern, (R. is radius of the circle sampling)
According to the discontinuities mapping, four sets of joint sets exist in the
R=0.7 m
2088
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik