Page - 2089 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2089 -
Text of the Page - 2089 -
studied area. The geometrical and mechanical characteristics of the joint sets are
shown in Table 2.
Table 2
The geometrical and mechanical characteristics of the joint sets
Type of
discontinuities Dip
(Deg.) Dip
Direction
(Deg.) K-
Fisher Mean
Hydraulic
aperture,
Phase III
(mm) Persistence
(cm) Spacing
(m)
Bedding 76 033 28.6 0.2836 1600 0.52
J1 60 123 13.5 0.0016 56 0.588
J2 46 280 6.6 0.0023 68 0.588
B.P.J. 70 029 11 0.0302 219 0.5
3.6. DISCRETE FRACTURE NETWORK (DFN) METHOD
The geometrical properties of the discontinuities include the number of
sets, dip angle, dip direction, length, frequency, intensity, density, Fisher's
constant, location and diameter (size). An accurate description of discontinuities
network that is based on the geometrical characteristics is an outstanding stage
in studying the permeability of the rock mass. The numerical code 3DFAHAM
produces a stochastic representation of the rock mass conforming with the
statistical nature of the data and the uncertainties in their determination. The
fractures center are represented as Baecher's disk and their dip angle are
distributed using Fisher's model. The number of fractures has been generated
using homogenous and stochastic Poisson's process [3]. The uniform distribution
function has been used to simulate the fractures location [11].
In order to study the effective connectivity between the fractures, it is
needed to omit the fractures or cluster of fractures which are hydraulically
inactive and do not contribute to transferring the flow. This process is called
Fractures Regulation. The REV†of a fracture network has been estimated on the
basis of the network connectivity parameter. The dimensions of an REV have
been calculated to determine the size of 3D block and the largest section for
calculating the HC tensor (HC window). The REV block is a cube whose edge is
6 m.
The modeling information such as simulation number and dimension of 3D block
are presented in Table 3. In each simulation, three sections are considered in
each block. Fig.7 illustrates a generated 3D block with its fractures and a
regulated 2D section. Due to the uncertainty of hydraulic aperture calculation and
high effect of this parameter on the equivalent permeability of the rock mass, four
aperture classes have been used in DFN analysis. So, 60 models have been run.
The calculated equivalent permeability with DFN code are shown in Table 4 using
the hydraulic gradients mentioned in section 2.3 and four aperture classes.
†Representative Elementary Equivalent
2089
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik