Page - 2100 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2100 -
Text of the Page - 2100 -
5.2. DESIGN OF THE HEADRACE SYSTEM
For the geotechnical design, a difference between the excavation of the
cavity in the course of tunneling and the design of the tunnel lining in operation is
made. The design of the cavities is done in line with the ÖGG guideline for
geotechnical design [6]. The deformation of the excavated cavity have been
determined by means of the convergence confinement method (Kolymbas [7]) in
each section of 25m and additionally at any important section. Considering the
deformations and the depth of the fractured zones, rock mass behaviour types
GVT1/2 to GVT 4 can be derived analytically. Rock mass behaviour types GVT 5
to GVT 11, if present, are determined with delineation criteria based on Steiner [8],
but modified for the specific project.
Four different lining types were used for the headrace and tailrace tunnels of
the Obervermuntwerk II:
– Unreinforced cast concrete
– Reinforced cast concrete
– Thin-walled steel lining
– Thick-walled steel lining
Fig. 6 shows the determination of lining type zones over the whole part of the
water system. An unreinforced concrete lining was constructed in the intake tunnel,
parts of the Silvretta tunnel and in parts of the tailrace tunnel, where the
groundwater table lies securely higher than the internal pressure line of the system.
Fig. 6
Determination of lining zones
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600
Deployment [m]
Obervermuntwerk II - Determination of lining zones
Chainage2825m
Start thick-walledsteel lining
Chainage2570m
Start thin-walledsteel lining
Unreinforced concrete ring
thin-walled steel lining with support ring from Chainage 2570m till ch.2825m
Thick-walled steel lining from chainage 2825m
Reinforced concretering
Liningzones:Legend:
Chart: Terrain
σ3 in meterof water
σ2 in meterof water Ground water
levelReduced
ground water level
Dynamic internal pressure line
Reduced dyn. internal pressure line
2100
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik