Page - 2110 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2110 -
Text of the Page - 2110 -
Graphic 2.The Monitoring of Crack Displacement by using the instrument of
Crack Displacement Meter
The monitoring towards crack displacement until year 2017 showed normal
digit on the result. It could be seen that the displacement of data trend was still less
than the maximum value i.e. between 0,0 mm to 0,3 mm, where the maximum
value was 2 mm. The monitoring towards cracks will continuously be done up till
now since the bigger number of the age of crack, the bigger cause of crash
happens. It happens since the crack caused by the age of building cannot be
avoided and the crash signal can be initiated from a crack.
2.3. CONVERGENMETER
Deformation which is happened in Power House Cavern was not only
caused by the impact of rock pressure or the characteristic of the rock, but also the
moving load inside the cavern such as the generator equipments. Based on the
condition, the regular monitoring was applied by using Convergenmeter to detect
the potential failure and damage early which were happened on cavern wall.
The deformation monitoring towards Cavern wall was done by measuring
the displacement of a couple of monuments which were installed along the terrace
upstairs by using Convergence meter. The measurement was aiming to know the
span between the north wall and the south wall of the Power House. So, the
displacement of the wall was known by the difference number between the new
and the old measurement.
2110
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik