Page - 2173 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2173 -
Text of the Page - 2173 -
will arise because in Indonesia never implemented Hollowcone manufacture and
replacement with a large enough size (3850 mm) with technical spesification
material in accordance with the original so that most of materials imported from
abroad (manufacture time 7 months).
HCV delivery requires a review of traffic and possible road conditions by
using trailers to climbs then derivatives and bridges to location of dam puddles.
Hollowcone installation implementation requires special tool such as cantilever
which doing by own fabrication (manufacture 3 months) mounted on top of
morning glory, so it requires special calculation and skill at dam water surface in
operating condition as needed. Disassembly and installation Hollowcone valve
takes four months. Before the replacement of hollowcone must repairs stoplog so
that hollowcone replacement implementation is not disturbed by stoplog
rubberseal leak. Replacement rubber seal takes three months.
Rules of works this activity are limited by reservoir water surface
elevation, which the unloading implementation is optimized at elevations below
+105.50 mdpl.
3.1.2. Administration
Funding for replacement of Hollowcone valve and stoplog is funded by
loan from World Bank and APBN companion with activity value 43.230.000.000
rupiah. The implementation of the activity is required to be completed before June
30th, 2017.
4. UNLOADING AND INSTALLATION HCV PROCESS AT IR. H DJUANDA
DAM
4.1. MANUFACTURING PROCESS
In November 2016, HCV metal structures construction and installation
support tools such as balanced cantilever, custom pontoon HCV, and others are
ready delivered to Jatiluhur Dam, where the manufacturing and testing process is
doing at PT. Barata Tegal. Workshop distance from Tegal to Jatiluhur Reservoir,
Purwakarta District is ±250 km by road, or approximately 2 days by truck, due to
steering effective time at night. The technical data of hollow cone valve diameter
is 3850 mm, with material ASTM A240 Gr. 2205, is planned to burdened with
pressure of 15 Bar. In mobilizing HCV to site using low bad trailer with packing
size of 5070 mm long and 5020 mm wide and 4120 mm height, if height of
2173
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik