Page - 2184 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2184 -
Text of the Page - 2184 -
Type “ A “ Type “ B “
Figure1
Types of Sacks for Pumice Packing
Second: when is the appropriate moment for contact grouting? Before or
after concrete lining was completed?
Third: Is it necessary to revise the contact grout holes’ arrangement? which
has already designed.
To find the answer of the first question, a simulation phase has been done
on the workshop. Answering the second question by selecting of two situations in
tunnel. One situation was shotcrete face finished and the other was finished face
of lining. The last question was find out after implementation of grouting and
according to the check-holes result.
3. SIMULATION OF CONTACT GROUTING
The purpose of this simulation is to investigate the grout penetration in the
empty space between the pumice pieces as well as the gap between the sacks.
Metal barrels were used to simulate contact grouting. One side of the barrels
were cut and two type of pumice sacks placed in and packed by welding. Two
valves were installed at the other side of barrels in order to grout injection and air
evacuation. Barrels abide for injection was maximum pressure of 1.5 bar. Water
Cement ratio of contact grout is 0.8.
Seven days later, grouted portion was hardened, then in laboratory the
barrels were rifted carefully and solid portion were taken out to prepare for core
drilling. Samples were used to determine the uniaxial compressive strength and
control the quality of the grouted solid portion.
The quality of core samples can be seen in figure 3. It shows two different
pumice packed types. As it shows the grout has penetrated in both types of
packed pumices and the voids between pumice pieces and gaps around the
sacks filled by injected cement properly. On the other hand, type of sacks has not
affected the grout penetration.
2184
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik