Page - 2220 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2220 -
Text of the Page - 2220 -
- η(p ∙ n)… Utilization of penetration & cutter head speed : η(p ∙ n)=65%.
For D&B it has been anticipated, that the length of one round is 3m and 3
rounds can be achieved per working day, independent from the excavation
diameter Dexc.. Fig. 4 clearly shows that for the common diameter range for
headrace tunnels, the TBM is the preferable method regarding net-advance
rates. This off course only is due if TBM has worked out as a feasible excavation
method.
Figure 4: comparison of TBM and D&B regarding achievable net advance rates
Considering the TBM preferable for high performance excavation and a
shielded TBM most appropriate for a wide range of rock mass behavior (BT), the
maximal benefit can be gained from a double shield TBM (TBM-DS) together with
a simple segmental lining. The TBM-DS is offering a Gripper mode for high
performance under preferable geological conditions and a single shield mode,
probably together with special pretreatment measures, for special zones.
Tunnel support according NATM and in situ concrete lining of course can
be the best choice on a Gripper TBM [4] for special projects with a short length
and / or small diameters. However, most probably it requires especially skilled
workers and is bearing a high risk regarding construction time and costs. The
qualification in skills and the risks regarding construction time and costs can
rather be reduced by applying the technology of mono shell precast tunnel
linings. Such precast segmental linings are linked to high performance
excavation, predominantly with double shield hard rock TBM’s.
For worldwide application of economically high performance pressure
tunneling and lining, it is a postulate, that construction can be performed with a
high percentage of semiskilled local workers supported by a small specific skilled
Common range of
TBMs for HPP
projects
0
5
10
15
20
25
30
35
3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 10
tunnel diameter [m]
Net advance rate [m/wd]
TBM [m/wd]
D&B - 1 heading [m/wd]
D&B - 2 headings [m/wd]
2220
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik