Page - 2252 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 2252 -
Text of the Page - 2252 -
COMMISSION INTERNATIONALE
DES GRANDS BARRAGES
-------
VINGT-SIXIEME CONGRES DES
GRANDS BARRAGES
Autriche, juillet 2018
-------
IMPROVEMENT OF INTAKE STRUCTURES WITH NUMERICAL SIMULATION
Helmut BENIGNI, JĂĽrgen SCHIFFER, Stefan HĂ–LLER, Helmut JABERG
Institute of Hydraulic Fluidmachinery,
GRAZ UNIVERSITY OF TECHNOLOGY
AUSTRIA
1. INTRODUCTION
The design of inlet and outlet areas of hydro power plants significantly
influences the overall cost of a plant not only in the design and construction
phases but also during operation. Due to an incorrectly shaped inlet geometry,
vortices and flow separation occurred at several river power plants. These
phenomena can cause flow problems and losses at the turbines and must not be
neglected, especially for low head turbines with relatively high specific speed
turbines. Sources of such inhomogeneous inlet flow distribution could be a wrong
design of dividing piers, gravel steps and other points of discontinuity in the flow
guiding walls and river bed. In this paper, samples of water way designs and their
optimisations, whose target is to avoid wrong inflow and outflow designs, are
presented together with cost-optimised design.
During the last decades, turbine intake structures have been investigated in
more detail. Based on the systematic analysis of vortex types, design rules for
the design of intakes to avoid free surface vortices as well as other publications
referring to swirling flow problems at intakes have been published [1]. Problems
of intake vortices have long been known [2, 3] and tests at laboratory scale were
realised in a systematic way including categorisation of vortices and empirical
correlations ([1], [4] newer ones [5], [6]). Since numerical simulations are getting
more and more reliable, investigations of these flow phenomena increased – but
also the effort connected to them. During the last few years LES and SAS
simulations [7, 8] captured the flow field with acceptable accuracy.
2252
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik